DISCLAIMER: Tents should always be staked down with Premium Tent Stake Kit and weighed down. Tents should not be used in inclement
weather, including thunderstorms, heavy rains, lightning, and high winds. No grill or any type of open flame is to be used under or near the
tent. User must read and observe assembly instructions. If this is not done correctly, it may result in damage to the unit, injury, or death, and
all warranties will be void. All warranties will be void if hardware is used with any print not produced by us. Properly care for prints to keep
them in great condition. Prints should never be dragged along the ground or stored without being properly folded and free from moisture.
Make sure print is completely dried from any weather, and fold and store in a clean, dry place. We don’t recommend storing print on frame.
WALL ASSEMBLY
1. When adding tent wall(s), the legs of the frame must be at
their maximum extension height.
2. Attach the wall’s hook adhesive to the loop adhesive on the
tent valance.
3. Secure the sides of the wall by wrapping the hook-and-loop
adhesive tabs around the tent legs.
4. Wall assembly is now complete.
1.
3.
4.
2.
EVENT BUDGET TENT
Assembly Instructions
R1.111518
