4
Xero Struc 4
3x
1.
2.
1/2019 (EN)
EN
1. Remove suspension bolt from wall bracket.
Secure wall attachments for upright to wall using 1 Ø 6 mm screw. Three wall brackets are recommended with an upright height of 2400 mm. The
fixtures and wall must be capable of taking a min. fraction weight of 160 kg.
2. Insert suspension bolts (3 per upright) into upright.
3. Insert suspension bolts into wall brackets and secure with enclosed cheese head screw.
4. Adjust the height of the uprights using the adjustable feet.
5. Insert the connector bar (min. 2 per axis) laterally into the uprights and tighten the clamping screws with the Allen key.
6. Insert the next upright (see point 2) into the wall bracket and connect with the connector bar.
7. Insert display panel sideways into the groove and centre between the uprights.
8. Fit end cap.
Assembly on the wall
