5
Invisible 3
22
0.866”
122
4.803”
150
5.906"
150
5.906"
Recommendation:
bar to support
bottom profile edge
19
0.748"
(1
6)
(0.
63
0")
13.5
0.531"
B
Recommendation:
fit screw at least every
300 mm
/11.811"
A
A
Countersunk screw M5 x 30 mm/1.181"
B
Pan-head screw 4 x 5 mm/0.157"x 0.197"
Recommendation:
use all fixation points, i.e. fit
screw every
150 mm
/5.906"
33.
3
1.311”
22.
4
0.882”
66.
7
2.626”
66.
7
2.626”
1/2019 (US)
Assembly instructions Invisible 3 profile panels one-sided
The following steps must be carried out when
assembling a one-sided profile:
1. Fasten the lowest profile to the wooden pa-
nel (min.
16 mm
/0.630") from the front using
a
4 x 15 mm
/0.591" screw and from the rear
using a M5 x
20 mm
/0.787" screw.
2. Insert a profile into the top of the bottom pro-
file - making sure that the profile is correctly
locked into place - and fasten to the wooden
panel with 4 x
15 mm
/0.591" screw.
3. Insert Invisible 3 end profile - making sure
that the profile is securely locked in place.
4. Attach frame to support panel.
Frame
Assembly instructions Invisible 3 profile panels double-sided
The following steps must be carried out when
assembling a two-sided profile:
1. Connect double-sided Invisible 3 profile
panels to one another - making sure that
each profile is securely locked in place.
2. Fit the end profile at the top - making sure
that it is securely locked in place.
3. Popular frame solutions (e.g. wood) are to
be screwed to the Invisible 3 profiles with M5
screws from the side.
