manualshive.com logo in svg

visplay FOS, Instructions For Assembly And Use, Page: 18 / 20

Share
Download
visplay FOS Instructions For Assembly And Use Download Page 18

FOS | Technical data

18

Visplay GmbH, 07/2022 Edition

7 

Technical data

Connected electrical loads

Connection / mains power

230/240 V AC

Frequency

50-60 Hz

Converter protection class

II

System operating voltage

24 V DC

System components protection class III
Maximum power for each power-

feed point

7 A  

168 W

8 

Weight loads

 WARNING

Risk of injury from falling objects and furniture components.

The system can fail if the maximum permissible load on the furniture or individual components is exceeded.

 

f

Please observe the maximum load value for the individual items of furniture.

 

f

Do not exceed the maximum load of 30 kg per frame.

The specified weight loads refer to the components listed in the Visplay manual. The maximum weight loads apply with 

respect to a uniform load distribution. The load must be reduced immediately if there is visible deflection or deformation of the 

components.

Maximum load

Connection frame with support insert

30 kg

Table top

30 kg

Hanging rail

60 kg

TV bracket

50 kg

Summary of Contents for FOS





















Reviews:

No comments