- 3 -
CHARGING THE CAPACTITOR
The capacitor must be charged before connecting the Power and Ground
cables directly. Failure to charge the capacitor will result in a large spark
generated from the rapid inflow of current.
To Charge the capacitor:
1.Make your positive terminal connections and tighten the bolt.
Caution: Do not over-tighten the bolts! Stripped terminals are
not covered under the capacitors warranty.
2. Before connecting the ground cable, place the supplied
charging bulb or resistor between the negative terminal on the
capacitor and the ground cable. Do this for 60 seconds or until
the light bulb goes out. Caution: The charging bulb may get
hot!
3.Immediately after charging, connect the ground cable directly
to the negative terminal on the cap.
display
BULB
CHARGING
)
(
)
(
--
+
BATTERY