Visonic PowerMax10, User Manual, Page: 39 / 50

WEEKLY MAINTENANCE
38 D-302757
C. To Periodic Test a Device

Press
OK I
or . The display reads [
DEVICES TEST
].
€
Press OK I or . The display now reads [
NOT TESTED NNN
].
NNN indicates the number of enrolled devices in the control panel that
have not been tested. This number automatically drops one count for
every tested device.
OK I
OK I

Press OK I . The display alternates between the device number, the
device type (e.g. magnetic contact, keyfob, keypad, etc.), and the device
location.
6
When the device list has ended, the display reads [
<OK> TO LEAVE
] .
D. To Exit the PERIODIC TEST Menu
‚
To exit "Periodic Test", press
OK I , the display reads
[
DEVICES TEST
].
ƒ
Press , the display reads [
<OK> TO END
] .
„
Press
OK I to exit.
OK I
Additional Information (Periodic Test)
1
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
2
If you have not already changed your personal code number, use the default setting – 1111.
3
If the INSTALLER CODE is used to enter the Periodic Test, the devices LED will blink according to the
link quality.
4
To skip the SIRENS TEST, press .
5
The Periodic test can be performed on a maximum of three sirens including one internal siren.
6
a. Click to scroll through the list of devices.
b. The device LED blinks continuously 3 seconds after the device is displayed.
<OK> TO END
DEVICES TEST
<OK> TO LEAVE
NOT ACTIVE NNN
Z01 NOT ACTIVE
FRONT DOOR
Z01 CONTACT
DEVICES TEST