Figure 3. Specific Detector ID window
PowerCode Message Definitions:
Display
field
Name
Definition
1
Jamming
0 = No jamming
E = European STD jamming level
U = USA STD jamming level
2
Quality of RF
signal
POOR / GOOD / STRONG
3
ID
The detector's ID (6 characters)
4
Data
7 6 5 4 3 2 1 0 (see Para.4.3)
5
Time of event
hh:mm:ss (24 h format)
7.
The system now begins to monitor the enrolled detectors. The
window will display the detectors you selected as shown in
Figure 3.
Note: The PowerCode Message Definitions table explains how to
read the data. The Definition of DATA bits in a PowerCode
Message table explains each bit of the DATA field in a
PowerCode message.
8.
Click X on the top right corner of the window to end the monitoring
and to close the window.
9.
A new window will open; click End Now.
Definition of DATA bits in a PowerCode Message:
Bit
Name
Value
Meaning
0
Tamper
1
Tamper event
1
Alarm
1
Alarm event
2
Low Battery
1
Low battery at transmitter
3
Working bit
0
Else
1
Transmitter has a restore
capability, e.g. Magnet
4
Restore
0
Transmitter with no restore, e.g.
PIR detector
1
Supervised transmitter
5
Supervise
0
Non-supervised transmitter, e.g.
Panic button
1
Transmitter works in a Spider
system (Not relevant)
6
SpiderNet
0
A regular transmitter, not in a
Spider system
1
The transmitter is a Repeater.
Displays messages received
from a repeater in the system.
7
Repeater
0
Any other transmitter
5.3 CodeSecure - Viewing Specific
Keyfob IDs
To view specific keyfob IDs, you need to enroll the required keyfobs
by filling a simple .txt file to provide details of the keyfob ID. To
perform this, follow the instructions in section 4.2.
Figure 4 displays the messages sent by a keyfob, where all four
keyfob buttons were pressed consecutively.
Figure 4. Specific Keyfob ID window
The CodeSecure Messages table provides the definition of each field
in a keyfob message.
CodeSecure Messages:
Display
field
Name
Definition
1
Jamming
0 = No jamming
E = European standard jamming
U = USA jamming
2
Quality of RF
signal
POOR / GOOD / STRONG
3
ID
7 character ID, for example,
015C613
3
FUNC
Button number; the 4 buttons have
code numbers 0010, 0100, 1000,
0001
4
SYNC
Transmission serial number
6
Time of event
hh:mm:ss (24 h format)
WARRANTY
Visonic Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") warrants its
products hereinafter referred to as "the Product" or "Products" to be in conformance with
its own plans and specifications and to be free of defects in materials and workmanship
under normal use and service for a period of twelve months from the date of shipment by
the Manufacturer. The Manufacturer's obligations shall be limited within the warranty
period, at its option, to repair or replace the product or any part thereof. The Manufacturer
shall not be responsible for dismantling and/or reinstallation charges. To exercise the
warranty the product must be returned to the Manufacturer freight prepaid and insured.
This warranty does not apply in the following cases: improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone for any consequential or incidental damages for breach
of this warranty or any other warranties whatsoever, as aforesaid.
This warranty shall not be modified, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modification, variation or extension of this
warranty. This warranty shall apply to the Product only. All products, accessories or
attachments of others used in conjunction with the Product, including batteries, shall be
covered solely by their own warranty, if any. The Manufacturer shall not be liable for any
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.
The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that such
will not occur or that there will be no death, personal damage and/or damage to property
as a result.
The Manufacturer shall have no liability for any death, personal and/or bodily injury
and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.
However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin, the
Manufacturer's maximum liability shall not in any case exceed the purchase price of the
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be the
complete and exclusive remedy against the Manufacturer.
Warning: The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. For various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perform as expected. The user
is advised to take all necessary precautions for his/her safety and the protection of his/her
property.
6/91
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not
returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
VISONIC LTD. (ISRAEL):
P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788
VISONIC INC. (U.S.A.):
65 WEST DUDLEY TOWN ROAD, BLOOMFIELD CT 06002-1376. PHONE: (860) 243-0833, (800) 223-0020 FAX: (860) 242-8094
VISONIC LTD. (UK):
FRASER ROAD, PRIORY BUSINESS PARK, BEDFORD MK44 3WH. PHONE: (0870) 730-0800 FAX: (0870) 730-0801
INTERNET:
WWW.VISONIC.COM
©
VISONIC LTD. 2005 MCR-300/UART DE3140U (REV. 0, 11/05)
4
DE3140U
