D-303015
3
PGM:
Pressing the AUX button will activate the PGM output (for further programming
instructions see the PowerMaster-10 Installer Guide section 4.12 CONFIGURING
OUTPUT PARAMETERS).
11.
12.
or
Select between "
Not Used
", "
Stop Beeps
", "
Skip exit delay
" and "
PGM
".
13.
When exiting "
INSTALLLER MODE
" menu, the PowerMaster-10 system displays the
number of devices that need to be updated, as follows: "
DEV UPDATING NNN
".
For detailed instructions on Adding Devices, Deleting Devices, Replacing Devices and
Defining Defaults see the PowerMaster-10 Installer Guide
.
6. OPERATION
The tables in the following sections describe how to activate the
various functions of the KP-140 PG2 keypad.
Security
Function Actions
Partition Selection (when
Partition is enabled)
/
/
(1)
Arming HOME
[user code]
Arming AWAY
[user code]
Disarming
[user code]
Quick arm / HOME
(
≈
2 sec.)
Quick arm / AWAY
(
≈
2 sec.)
Instant
(perform HOME/ AWAY arming)
(2)
Latchkey
(perform arm AWAY)
(3)
Duress
[duress code]
(2580 by
default)
AUX Function
(4)
Status
(5)
Automation
Function Actions
X-10 device ON
[X-10 no. 01 to 15]
X-10 device OFF
[X-10 no. 01 to 15]
X-10 device toggle
[X-10 no. 01 to 15]
PGM device ON
[00]
PGM device OFF
[00]
PGM device toggle
[00]
X-10 or PGM device
status
[00 to 15]
Safety
Function Actions
Emergency alarm
(
≈
2 sec.)
Fire alarm
(
≈
2 sec.)
Panic alarm
(
≈
2 sec.)
Notes
1. For arming HOME/AWAY a specific Partition, first press the
Partition number and then perform the arming action.
2. For INSTANT arming function, press the HOME/AWAY
button, enter the user code while the HOME/AWAY button
blinks, wait for success acknowledgement (green LED lights
and "happy" beep is heard), then press the INSTANT button.
3. For LATCHKEY arming function by arming AWAY / quick arm
away, wait for success acknowledgement (green LED lights
and "happy" beep is heard), then press the AWAY button
twice.
Note:
Immediately after performing arming AWAY of the
system, you can perform the Latchkey and Instant functions,
one after the other.
4. The function of the AUX button can be configured on the
control panel (see section 5.)
5. The
STATUS
button
has two functions; pressing
the
returns the KP-140 PG2 to idle mode from any
sequence, or, when the KP-140 PG2 is in idle mode, it
displays the status of the control panel. Pressing the
button, when the KP-140 PG2 is in idle mode,
provides the status of the control panel and is indicated when
the
/
/
button lights steadily and the LED
provides indication on the status of the control panel (see
table below). If Partition is enabled, the partition no.
(
/
/
) lights steadily in parallel to the
/
/
button and the LED provides indication
on the status of the indicated partition no.
Not used
