Vislink Strata RX, Technical Reference Manual

Page: 161 / 186

Configurator Reference C-11
Strata RX
Technical Reference Manual
Figure C-12: MPEG Page C.4.6 FMR Page
The FMR Page is show in Figure C-13. This is the page that
displays when you click on the
FMR
tab.
You will use this Page to define analog demodulator (FMR)
settings for each of the 9 available Presets.
Note that, unlike digital operation, analog operation requires you
to manually set the demodulator to match the incoming analog
signal.
For each Preset you can:
• Select the
Video Deviation
. Choices are:
- 3 MHz
- 4 MHz
• Configure the video
Low Pass Filter
.
When available as a setting, this field turns into a button
which you can click to select ON or OFF.
When not available, this setting defaults to ON.
Choices are:
- ON
- OFF
Note that the Low Pass Filter setting is only available in the
following situations:
When Connected to the RX
The analog demodulator (FMR)
must installed in the RXU, and there cannot be an RCU in the
System.
When configuring offline
The FMR in the RXU must be
selected and the RCU cannot be selected.