manualshive.com logo in svg

VisionTrack VT5500-G-LTE, Manual, Page: 19 / 34

Share
Download
VisionTrack VT5500-G-LTE Manual Download Page 19

 

 

3.2.3 IPC Setup 

 

⚫

 

Support auto IPC plug and play configuration, IPC quick settings and manual IPC 

channel configuration by IP search.   

⚫

 

Support IPC quick settings. 

1)

 

MDVR with PON interface: do not support IPC quick settings (X1 and X3 have PON 

interface). It supports the auto discover function: MDVR will automatically assign one IP to IPC 

after connecting to IPC. At this time, MDVR won’t save the IP address into parameters and IP 

address will be reassigned after the re-plug.   

2)

 

MDVR with POE interface: IP address of IPC requires quick settings since the device 

needs to connect to the switch. MDVR will automatically search IPC and configure the searched 

IPC with IP address after connecting to the switch. IP address starts from 10.100.100.100 and 

skips the IPC network segment address. For IPC searched by quick settings, it is required to be 

bound with the channel when entering the channel configuration screen.   

⚫

 

The corresponding analog channel automatically becomes invalid after enabling the IPC 

channel.   

Summary of Contents for VT5500-G-LTE



































Reviews:

No comments