t
+44 (0) 1246 225 745 |
e
w
visiontrack.com
16
3.5 DSM Calibration*
3.4 DSM Camera FOV
It is recommended to have the actual driver perform the calibration. If this is not
possible, it is best to ask a person with a similar height for help.
Open the IPC settings of the DSM camera channel, e.g. Channel 5.
Keep the device name as "DSM" and select "Calibration", set "Front" or "Side"
depending on the installation location.
The driver camera FOV should
cover the facial area of the driver
and the tops of the shoulders. Allow
space to the left, right, up, down for
more flexibility so that it is possible
to catch the driver's face when
looking in different directions.
*You may need VT Commission Support for this step. Refer to the Commissioning section on
page 19
.
VT3000-AI INSTALLATION GUIDE
