9
FUNCTIONS
G
‐
Sensor
Calibration
1. Install the unit and park the vehicle on a flat surface .
2. Turn on the unit and press the small red button three seconds.
3. Then calibration will be done with “beep” sound.
Built
‐
in
power
backup
(Super
Capacitor)
When power to the unit is interrupted, VT2000 creates the last
file using the internal Super Capacitor.
Time
and
Date
There are no time and date settings as the VT2000 get’s this information from the
GPS satellite's.
SD
Memory
Card
Format
Please format [initialize] the SD card using the “Configuration Tool VT2000”
software.
G‐Sensor Calibration is needed after installing the VT2000.
Power
off
vehicle
and
take
out
SD
memory
card
Turn off the power and then check the BLUE LED light. Once the LED light
is not on, you can now safely remove the SD memory card.
Safely
Removal
SD
Card
