VEDIO IN
L
R
S-VEDIO
1
2
ANT IN
VCR connection
NOTE:
All cables shown are not included with the TV.
External Equipment Connections
Choose Your Connection
Installation
10 PLASMA TV
There are several ways to connect your television,
depending on the components you want to connect and the
quality of the signal you want to achieve. The following are
examples of some different ways to connect your TV with
different input sources.
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune the
TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to the S-VIDEO
input, the picture quality is improved; compared to
connecting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner`s manual.)
3. Select the input source with using the INPUT
button on
the remote control, and then press
/
button to select the
source, press the
OK
button to confirm.
