
Chapter 1 -Basic Controls and Connections
1.1 - Front Panel Controls
1.CH(+/-)-These buttons increase or decrease the channels. When the OSD is active, these buttons
are used to select OSD options.
2.VOL(+/-)- These buttons increase or decrease volume. When the OSD is active, these buttons
adjust the OSD options.
3.MENU - This button opens the TV OSD menu.
4.INPUT-This button switches between the available input sources in the sequence: AV, S-Video
YPbPr1,YPbPr2,VGA, HDMI, ATV and DTV, Press the button repeatedly to cycle through the available
options.
5.Power Button( )-Switch the LCD TV on by pressing the button once. Press the button again to turn the
LCD TV off.
6.Remote Control Sensor-This is the window that passes all of the remote control signals to the TV. Point
the remote control directly at this window for the best response to the remote signal.
7.Power Indicator Light - If the light is solid red, then your LCD TV is turned off. If the light is solid
green, then your LCD TV is turned on. If the light is not lit, there is no AC power detected and the power
cord may not be connected properly. When turning the LCD TV on or off, wait three seconds before
pressing the power button again.
WWW.VISIONQUESTTV.COM
8