Visionite VTC-Z7823H, Manual

Page: 21 / 45

21
Slow AE Response
The Slow AE Response function allows you to reduce the
exposure response speed.
(example) If the headlights of a car are caught by the camera,
the camera automatically adjusts the exposure so that it can
shoot a high-intensity subject. Since AE responds slowly, it can
be prevent images from being shot.
CAM_AE_Response 8x 01 04 5D pp FF pp: 01 to 30
default 01
Digital Image Stabilizer
This function reduces image blurring caused by vibration
●
RANGE : Set the compensation range. Up to 30% of the
input image range is used, and digital zoom is required up to
1.4 times according to the setting.
●
FILTER: Correction filter for the worst case of the image
(built-in Hold filter). If you increase the setting value, the
correction becomes less. If you decrease the setting value, the
correction becomes better. However, a malfunction may occur
in a moving subject or a low-illuminance / no-pattern image.
●
AUTO C : Auto Centering to distinguish camera shake from
PANNIG. It compensates for high frequency vibrations such as
tremor and allows the screen to move naturally to the camera ʹ s
PANNING. In the case of FULL, the camera always corrects
the direction in which the image is positioned at the center of
the image. In the case of HALF, the center of the correction
area is completely corrected (PANNING is ignored) and only
the periphery is centered.
(before) (after)
Home Position Mode
After power on, you can choose whether to move to the last
position before power off or to x1 position.
KT_HomePow
erOn On 8x 01 70 24 02 FF Moving to x1 position
Off 8x 01 70 24 03 FF Move to final position
before power off
Memory Preset
16 sets of camera shooting conditions can be stored and
recalled.
• Zoom Position
• Digital Zoom Mode
• Focus Mode
• AE mode
• Shutter control parameters
• Bright , Iris, Gain
• Exposure Compensation mode
• Exposure Level
• Backlight Compensation mode
• Auto Slow Shutter On/Off
• White Balance mode
• Red/Blue Gain
• Aperture Control
• ICR mode, Defog, WDR mode
CAM_Memory Reset 8x 01 04 3F 00 0p FF p:Memory
Number(0~F)
Set 8x 01 04 3F 01 0p FF
Recall 8x 01 04 3F 02 0p FF
(See. Custom/Memory Preset Setting Items)
Custom Preset
As with the memory preset function, the camera shooting
conditions can be saved and recalled. The settings are
recalled when the power is turned on.
• The above memory preset contents
• Privacy mask, Motion detect , Title
• Flip, mirror, negative, BW, Gamma, DNR, DIS, AF
controls, camera ID, HLC, ETC.
CAM_Custom Reset 8x 01 04 3F 00 7F FF Starts up in this
mode when the
power is turned on
Set 8x 01 04 3F 01 7F FF
Recall 8x 01 04 3F 02 7F FF
Inactive 8x 01 04 3F 10 7F FF
Active 8x 01 04 3F 11 7F FF
(See. Custom/Memory Preset Setting Items)
(NOTE)
You can decide whether to use a custom preset.
When the product is shipped, custom preset is disabled(inactive mode)
To enable the custom preset, the user must send SET/RECALL or
ACTIVE command.
To disable the custom preset, send INACTIVE command.
<Custom Preset Mode>
When the power is turned on,
- Active : starts up in the custom preset settings
- Inactive : starts up in the settings before the power is turned off
(factory shipment default : Inactive mode)
User Memory Area
You can use up to 16 bytes to store data such as camera
number.