300lbs Indoor Electromagnetic
Lock - Black Color
Disclaimer:
VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
Out Swing Door
1
Installation
Template
Fold the EML-600 Template
along the dotted line upto 90°.
Door
Door Frame
Template
Out Swing
2
Close the door, position the EM lock
mounting location as close to the
door upper corner with gap 10mm.
3
Door Frame
Place the template against the
door & frame and drill holes
according to template indications.
Door
4
Drill 2 holes on Frame and 3
holes on door as indicated on
the template.
5
Install the Armature Plate to the door.
Note: Actual installation may varies
according to door figures.
Door Frame
Door
Door
Armature Plate
Sexnut Bolt
Rubber
Washer
Metal
Washer
Armature
Screw
Wooden Door
Mount the FB600 on the door
frame by screw in the self tapping
screw on the holes as indicated
on template.
7
Once position is correct, screw in
others screws to permanently
mount the plate; and drill the wire
cable access hole.
8
Use the Allen key wrench to
unscrew the anti tamper nut and
screw in fixing screws through
bottom of E.M.lock into the FB-600
9
Cable Wire
Fixing Screw
x2
Allen Wrench
Anti Tamper
Nut x2
PCB Cover
Cover
Screw
Holding Force
Door
Frame
Door
EM Lock
10
Connect to power supply and test
the unit.
Door
Rubber Washer
This allow the armature plate to
pivot around the armature screw
to compensate the door
misalignment.
6
ZL Bracket for Swing-In Door Installation Guide
In Swing Door
In-Swing
1
Door
Frame
Door
EM Lock
L
The door frame min. height value
"L" is needed to accommodate the
bracket Model:
- 300ZL(L) = 39mm
- 600ZL(L) = 46mm
- 1200ZL(L) = 73mm
2
Position the L-Bracket mounting
location as close to the door upper
corner with gap min.10mm; make
sure the door is closable.
3
L-Bracket
Fixing Screw
x2
Allen Wrench
12/24 VDC
Power
Mounting
Bracket
Cable Wire
Tighten the EM Lock on the
L-Bracket by using Allen Wrench.
4
Assemble the Z-bracket and make
sure the Z bracket can be adjust
freely, before permanent tighten.
P/H MC Screw
M4 x 8
5
Install the armature plate on the
Z-Bracket; using the CSK screw
given in screw pack.
Rubber
Washer
Flat Washer
Armature
Screw
6
Close the door, and position the
Z-Bracket by bringing the armature
plate close to the EM Lock surface.
Technology Within Your Reach
VIS-ML300LED-BL
ref.
