Visionis VIS-3013, User Manual

Page: 78 / 156

Fingerprint Access Control Terminal User Manual
64
8.2.2 Configure Basic Information
You can add person to the client software one by one and configure the person's basic information
such as name, gender, phone number, etc.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person.
3. Click
Add to open the adding person window.
The Person ID will be generated automatically.
4. Enter the basic information including person name, gender, tel, email address, etc.
5. Optional: Set the effective period of the person. Once expired, the credentials and access
control settings of the person will be invalid and the person will have no authorization to access
the doors\floors.
Example
For example, if the person is a visitor, his/her effective period may be short and temporary.
6. Confirm to add the person.
– Click Add to add the person and close the Add Person window.
– Click Add and New to add the person and continue to add other persons.
8.2.3 Issue a Card by Local Mode
If a card enrollment station is available, you can issue a card by local mode. To read the card
number, you should connect the card enrollment station to the PC running the client by USB
interface or COM, and place the card on the card enrollment station.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add to enter Add
Person panel.
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to
Configure Basic Information .
3. In the Credential → Card area, click .
4. Click Settings to enter the Settings page.
5. Select Local as the card issuing mode.
6. Set other related parameters.
Card Enrollment Station
Select the model of the connected card enrollment station.