Visionetwork ES3610, User Manual, Page: 57 / 59

Appendix B: Understanding VN-GLIMPSE Performance ES3610/11 User Guide
I447GB issue 6 Page 57
Adjusting the Encoder Parameters
Using the VN-GLIMPSE Setup Utility (see page 32) you can set the following parameters:
•
Bandwidth Limit – If you are using a large number of RGB ADPATERS or you have a
slow/busy network, you can reduce this value which sets the maximum possible flow of data
being streamed onto the network. However, remember that this could cause the refresh rate
to be reduced, especially during periods of high source activity.
•
Refresh Rate (frames/sec) – If you have a source which does not require a particularly high
refresh rate, but has a reasonably active content you can set the maximum possible refresh
using this value. By keeping the Bandwidth Limit high you can keep both latency and the
average bandwidth usage to a minimum.