Maintenance Kit for an Auto Document Feeder (ADF) with Flatbed Scanner
1
This Kit Contains
♦
1 Bottle of Streak-Free De-Ionized Cleaning Solution
♦
10 Lint-Free Dry Cleaning Cloths (White)
♦
5 Dry Cleaning Cloths (Blue)
♦
3 Scan Through Staticide Wipes
♦
10 Isopropyl Alcohol Pre-Moistened Cleaning Wipes
♦
2 ADF Pad Assemblies
♦
Cleaning
Instructions
Maintenance
Instructions
♦
Dry Cleaning Cloth & Cleaning Solution (Flatbed Only)
•
Spray the flatbed glass with the De-Ionized Cleaning Solution
•
Wipe the glass clean using a lint-free dry cloth (white)
•
Clean the ADF scan frame (small strip of glass with a white
frame and is the
only
area where ADF images are captured)
•
Spray the cleaning solution onto a dry cleaning cloth (blue) to
clean the outside of the scanner and the cables
♦
Scan-Through Staticide Wipes (ADF Only)
•
Pre-moistened 8.5x11 pads; keep sealed until use
•
Open the package and take out the pre-moistened pad
•
Unfold the pad and place in the ADF
•
Scan the pad as you would a regular piece of paper
•
Take the pad from the output bed and repeat the scan
process 4 additional times then delete resulting scan images
♦
Pre-Moistened Cleaning Wipes
•
Use these wipes between Staticide Scan Through cleanings
•
Open the ADF door and wipe down all plastic surfaces
2
•
Wipe and rotate the rollers to ensure the entire surface of
each roller is clean, wipe down the ADF pad
•
DO NOT vigorously rub these across the rollers
♦
ADF Pad Assemblies
•
ADF Pads push the paper against the main pick-up roller and
is a user replaceable, consumable part
•
Each pad can be used for up to 20,000
3
scans
•
Open the scanner and remove the ADF Pad by pinching the
plastic clips on either side of the metal bar, place a new pad
in the scanner, press on the metal bar until it snaps into place
Note: The scanner should be powered off for all cleaning methods except for when
using the Staticide Pads.
1
The contents of this kit should be kept in a clean, dry area and out of the reach of children.
2
Do not attempt to clean the black paper-sensor arm, wipe gently around this area without touching the paper
sensor.
3
This number varies based on scanner model, paper weight, paper texture, size of scan batches and frequency
of scanning.