How to Setup Your Card Reader
1.
Install driver first time if your system is Windows
®
98/SE or Windows
®
2000, (Refer to the next
section of driver installation)
2.
Connect USB cable to your PC's USB port that usually labeled as
or
symbols.
3.
Connect mini USB end to card reader mini USB connector.
Driver installations
The card reader need to setup relative driver for
Windows 98SE and Windows 2000
, you can find
the setup disc that came with the package, and follow below steps to complete the driver installation.
The reader is driver-free for
Windows
®
ME
、
Windows
®
XP
systems, you don’t have to install any
driver, just connect reader to PC’s USB port directly. Windows will detect and install all the associated
files automatically. A
"Removable Device"
icon will appear on the task bar and recognized with four
“Removable Disk”
icons in
“My Computer”
window
.
Note1:
If you need to display memory card icon on each removable disk in Windows
®
ME or
Windows
®
XP systems, we recommend you install driver. (Please refer to following
Windows
®
ME & Windows
®
XP driver installations)
Note2:
All the driver installation steps may be a little different from this guide when you using a new
upgrade version O.S., in this situation please follow the Windows prompt steps to complete
the installation procedure.
Summary of Contents for USB 2.0 12 IN 1 Card Reader/Writer
Page 8: ......
Page 10: ...6 Check Complete item then click Next to continue 7 Click Next button to continue...
Page 11: ...8 Select an installation folder and click Next to continue 9 Click Next button to continue...
Page 16: ...11 Choose Install item then click install button to continue 12 Click Yes button to continue...
