38
V
ISIONEER
S
TROBE
XP 200 S
CANNER
I
NSTALLATION
G
UIDE
3. On the Scanners and Cameras Properties window, make sure the
Strobe XP 200
scanner is selected, and then click
Properties
.
4. On the Strobe XP 200 Properties window, select the
Advanced
tab.
5. Click
Calibrate
on the Strobe XP 200 Properties window.
6. Place the calibration paper in the scanner face up, and then click
OK
to start the calibration.
7. When calibration is finished, click
OK
to acknowledge and close
the completion message.
To recalibrate your scanner for Windows XP:
1. On the Windows taskbar, click
Start
, point to
Settings
, and then
click
Control Panel
.
2. On the Control Panel, click
Scanners and Cameras
.