Visioneer Rabbit PC30dwn User Manual Download Page 13

Page: 13 / 121

Visioneer

Rabbit™ PC30dwn

Welcome

User Guide

■

An available Universal Serial Bus (USB) 3.0 port

■

Microsoft® Windows® operating system:

■

32-bit or 64-bit Windows 7 (Service Pack 1)

■

32-bit or 64-bit Windows 10

■

32-bit or 64-bit Windows 11

■

Minimum of 2 gigabyte (GB) of internal memory (RAM)

■

Minimum available hard disk space:

■

350 MB for the device driver

■

Monitor (recommended settings)

■

Color quality of 16-bit or 32-bit

■

Resolution set to at least 800 x 600 pixels

Refer to your Windows documentation for instructions on setting the color quality and resolution for
the monitor.

DOCUMENTATION

The following printed documentation is provided in the box:

■

Installation guide

— abbreviated device setup and installation instructions.

■

Technical Support, Warranty and Review Cards

— contact information for technical support and

customer service, and a brief overview of our standard product warranty. Follow the instructions on
the card to register your scanner. Please take a moment to write a short review of your experience
with this scanner.

The following soft-copy documentation is available during installation or on

www.visioneer.com

■

Device user guide

— instructions for device setup, installation, operation, maintenance, safety, and

warranty.

Summary of Contents for Rabbit PC30dwn


























































































































Search results

Summary of Contents for Rabbit PC30dwn

Reviews:

Related manuals for Rabbit PC30dwn

Brands by name

Popular brands

Visioneer Rabbit PC30dwn, User Manual

Search results

Summary of Contents for Rabbit PC30dwn

Reviews:

Related manuals for Rabbit PC30dwn

Brands by name

Popular brands