Chapter 6 Using the Browser Interface
AVN422HD User’s Manual
24
T is a high throughput request bit. R is a high reliability request bit. Any other scheme utilizing the
setting of the upper 6 bits of the Type of Service (TOS) byte in the IP header may also be used.
AUX1 Destination
– Displays the destination IP address and port for Auxiliary Stream 1 and
allows the value to be changed.
AUX2 Destination
– Displays the destination IP address and port for Auxiliary Stream 2 and
allows the value to be changed.
6.4.5 Channel SAP Page
The Channel Session Announcement Protocol (SAP) page allows the SAP settings to be
configured.
SAP Enabled
– Displays the current SAP Enabled status and allows the editing of this
parameter. When SAP is enabled (Yes), SAP announcements are broadcast over the network at
the SAP announce frequency. When SAP is disabled (No), no SAP announcements are
broadcast over the network.
SAP Announce Frequency
– Displays the current SAP Announce Frequency and allows the
editing of this parameter. The SAP Announce Frequency determines how often (in seconds) the
SAP announcement is broadcast. The default value is 30 seconds.
SAP Scope
– Displays the current SAP Scope and allows the editing of this parameter. SAP
Scope determines how "far" the SAP broadcast will go on the network. Scope, as pertains to
SAP, is loosely defined. It is network dependent and not always directly associated with network
segments. The default value is 32.
SAP Session Name
– Displays the current SAP Session Name and allows the editing of this
parameter. SAP session's name is often used or displayed in SAP aware applications.
