© 2018
Step 2 of 2
Order #XXXXX
Monitor
Mount
Reflection
Panel
Velcro
for Strip
Lights
*
*
*
*
*
Completed Assembly
*
Slide light onto clip then lock clip
into groove of horizontal extrusion.
Light Connection
Clip
Light
Light
Horizontal Extrusion
Clip
Monitor Mount
V4 Connectors
*
Slide connectors into groove
of extrusion. Tighten set screws
to secure connectors in place.
Attach monitor mount back
plate to extrusion, using bolts.
Bolts
Monitor
Mount
Connector
Literature Holder Attachment
Locks
Literature
Holder
Attach angled end of connector to
literature holder. Attach flat end of
connector to vertical extrusion.
Tighten locks to secure.
*
Steps:
1) Attach literature holders to vertical [7]. See
Literature Holder Attachment
detail.
2) Attach monitor mount to vertical [3]. See
Monitor Mount
detail.
3) Connect lights to horizontal [5]. See
Light Connection
detail.
4) Connect strip lights to Velcro on center of reflection panel then attach reflection
panel to Velcro on verticals [6] and [8].
5) Connect graphic to Velcro on back of extrusions [2] [3] [4] and [5].
7
5
6
4
3
2
8
VK-1318 Attachments
