© 2017
w w w . c l a s s i c e x h i b i t s . c o m
Order #XXXXX
Step 3 of 4
Backwall Attachments
Steps
1) Attach assembled Header to Ceiling, using screws and wing nuts.
See
Header Attachment
detail.
2) Attach Ceiling to top of assembled Backwall, using screws.
3) Attach Wings to A10 Clamps. See
A10 Clamp
detail.
4) Attach Sign. See
Sign Attachment
detail.
5) Attach Literature Holders. See
Literature Holder Attachment
detail.
6) Attach Monitor Mount to [5]. See
Monitor Mount Attachment
detail.
7) Connect Header Graphic to Velcro on back of assembled Header.
8) Connect SEG Graphic to Velcro on back of assembled Backwall.
Item Qty Description
12
2
5.862” Vertical Extrusion
13
1
80.638” Curved Horizontal Extrusion
14
1
78”w Horizontal Extrusion
NOTE:
Extrusions [12/13/14] stay assembled
when packing and shipping.
Connector
Vertical
[4]
Literature Holder Attachment
Locks
Literature
Holder
Attach angled end of Connector to
Literature Holder. Attach flat end of
Connector to Vertical [4]. Tighten
locks to secure.
*
12
12
13
14
5
2
3
4
Ceiling
*
*
*
*
*
*
Header
Monitor Mount Attachment
Attach Monitor Mount to Mount Plate
[5], using bolts and wing nuts.
Wing Nut
Bolt
Monitor
Mount
5
*
*
Screw
Cap
Sign Attachment
Connector
Tighten set screw to
secure A10 to Extrusion.
A10 Clamp
Tighten knob to secure
Wing Panels.
Sign
Slide Connector on back of Standoff
Barrels into groove of Vertical [4]
and twist Standoff to secure. Secure
Graphic to Standoff using Screw Cap.
Standoff
Barrel
Bolt
Header Attachment
*
Ceiling
Panel
Header
Wing Nut
