© 2018
Order #XXXXX
*
Assembled
Door
1
2
3
4
5
5
6
6
7A
7B
8
8
Floor
Infill
Infill
Pedestal Top
Pedestal Base Assembly
Completed Assembly
Item
1
2
3
4
5
6
7A,7B
8
Qty.
1
1
1
1
2
2
1,1
2
Setups:
1) Connect verticals [1] [2] [3] and [4] with horizontals [5] and [6].
2) Insert
infills
between [1 and 2] [1 and 4] [3 and 4] then secure with horizontals [7A] [7B] and [8].
3) Attach door to vertical [3]. See
Door Attachment
detail.
4) Place floor on lip of horizontals [5] and [6]. See
Extrusion Lip
detail.
5) Attach Velcro on shelf supports to infills, inside assembled pedestal base.
6) Place shelf on shelf supports.
7) Attach pedestal top to horizontals [7A] and [7B]. See
Pedestal Top Attachment
detail.
Shelf
Shelf
Support
Velcro
Door
Hinge
Hinge
Slide pin into
hinge attached
to Vertical.
Slide Door
hinge over pin.
Door Attachment
*
*
*
*
*
*
*
*
Align hole with pin
Rotate pin. Spring
will push pin into hole.
Pedestal Top Attachment
1
2
*
Pin
Hole
Infill
Extrusions [5] and [6] have
a lip for the floor to rest upon.
Lip
Extrusion Lip
*
Description
40.232” S40 Curved Vertical Extrusion
38” S40 Vertical Extrusion w/ Stoppers
38” S40 Vertical Extrusion w/ Hinges
40.232” S40 Curved Vertical Extrusion
11” Z45 Horizontal Extrusion w/ Lip
23” Z45 Horizontal Extrusion w/ Lip
14.567” Z45 Horizontal Extrusion
23” Z45 Horizontal Extrusion
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
MOD-1300 Pedestal
