background image

 

Safety  

Pacemaker Safety Guidelines 

Do not use the Helix HD near inadequately shielded medical devices. 

There are 2 magnets located within the base of the Helix HD and 3 in the 
control pad. The magnets used are: Neodymium N42 22 x 11 x 2 mm.  

If  you  have  a  pacemaker  fitted  please  consult  the  manufacturer’s 
guidelines for safe operating distances.  

Do not place the control pad or Helix HD directly on your chest.  

General Safety Guidelines 

  Please  handle  the  Helix  HD  with  care  as  rough  handling  may 

damage internal components and will void your warranty. 

  Always operate the unit in a place where the temperature is between 

10°and 35°C (50°and 95°F). Do not expose to excessive heat, cold 
or direct sunlight.  

  Keep the unit away from wet areas, rain, and other sources of fluid, 

moisture and chemicals. Do not submerge the unit. 

  Do not attempt to repair the unit; any unauthorised attempt will void 

the product warranty. Please contact your distributor.  

  Use only the supplied power adapter. 

  Always  unplug  the Helix HD before cleaning.  Only  use a soft damp 

cloth  to  clean  the  exterior.  Do  not  use  cleaning  agents  or  abrasive 
materials as they will damage your unit.  

  Please be aware of the risk of explosion if the battery is replaced by 

an incorrect battery type.  

  Use  of  the  Helix  HD  other  than  as  described  in  this  manual  will 

exclude it from warranty. 

 

 

Summary of Contents for Helix HD


























Reviews: