background image

TC2-HDBT_manual_en 

DECLARATION OF CONFORMITY 
Where applicable Vision products are certified and comply with all known local regulations to a 
‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all 
applicable certification standards for sale in the EU and other participating countries. 

The product described in this owner manual is in compliance with RoHS (EU directive 
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned 
to the place of purchase at the end of its useful life for recycling. 

WARNINGS 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL. 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of electric shock to persons.  

The exclamation point within an equilateral triangle, is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
appliance.

 

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE. 

 
All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan 
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, 
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY 

 

 

 

DECLARATION OF ORIGIN  
All Vision products are made in the People’s Republic of China (PRC). 

Summary of Contents for TC2-HDBT










Reviews: