Vision CS-1900P, Owner'S Manual, Page: 5 / 158

5
CS-1900P_manual_en.doc
SPEAKER CABLE
Speaker cable is included to connect master to slave. You can use other speaker cable; it must
be unshielded with a gauge of no less than 0.75mm. WARRANTY VOID IF YOU USE
UNSUITABLE SHIELDED CABLE E.G. PHONO OR MINIJACK CABLE.
IR RECEIVER SWITCH
FRONT - IR receiver on front active. Remote control can be used normally
REAR –IR receiver on rear active. Front IR receiver disabled. Suitable for control system
integration.
DAISY-CHAIN
Connect multiple sets together in larger rooms – no limit to number of sets. The first set in
chain is “master set” which switches inputs and adjusts volume.
Do not connect a laptop or phone directly to the daisy-chain input.
BLUETOOTH AUTO-SWITCHING
Use BT PRIORITY on remote control to enable auto-switching from line-level input to Bluetooth
input when a Bluetooth device is paired.
With BT PRIORITY on, When a BT device is unpaired the speakers will switch back to line-level
input.