Vision BP650, User Manual

Page: 3 / 6

BUDGET PRO series 650-2200VA - UPS www.visionups.com
3

Only connect computer-related elements to the UPS unit.
DO NOT CONNECT medical applications or life-support equipment.
DO NOT CONNECT AS WELL laser printer, labelling machines, copy machines, generators, vacuum cleaners, drain
pumps, microwave ovens or other larger electric appliances to the output connectors. The electricity consumption
would cause an overload and possibly even the damage of the UPS.

To reduce the risk of overheating: do not cover or block the vent of the UPS unit, do not expose the appliance to
direct sunlight, do not install it near heat emitting appliances such as space heaters or furnaces/ovens.

Pull the mains plug out of the socket before cleaning. Do not use liquid or spray detergents.

Do not expose the batteries to fire because they may explode.

Do not open and/or damage the batteries on their outside: released electrolyte (lead-acid-accumulator) is harmful
to skin and eyes. It may be toxic.

A battery holds the risk of electric shocks and short circuits. The following precautions should be considered when
working with batteries:
1)
Remove watches, rings or other metal objects from your hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and rubber boots.
4) Do not deposit tools and/or metal parts on the battery.
5) Disconnect the appliance from the mains each time you are connecting or disconnecting the battery terminals.

The maintenance of the batteries should be executed by battery-knowledgeable personnel. Observe the
recommended and necessary precautions. Keep unauthorised personnel away from the batteries.

When the batteries are replaced, utilize the same quantity and type of sealed lead-acid battery. The ambient
temperature may not exceed 40°C. For maintaining the battery lifetime, we advise an ambient operating
temperature of 20°C to 25°C.

Ensure during the installation of the appliance, that the sum of the residual current of the UPS and of the
connected load does not exceed 3.5mA.

Caution of electric shocks. Even when the unit is disconnected from the mains, dangerous voltages could be
achieved via power supply from the battery. For that raison, interrupt the battery on its plus and minus poles
when maintenance and servicing activities are necessary and undertaken.

The mains socket outlet that supplies the UPS shall be installed near the UPS unit and shall be easily accessible.
3. SPECIFICATIONS
LED Model BP650 BP850 BP1100 BP1300 BP1600 BP2200
& LCD Model BP650D BP850D BP1100D BP1300D BP1600D BP2200D
Capacity 650VA 850VA 1100VA 1300VA 1600VA 2200VA
Input
Voltage 220 / 230 / 240 Vac
Voltage range 162-290 Vac
Frequency range 60/50 Hz (automatic recognition)
Output
Voltage in battery mode 230 Vac ±10% (no block sinus)
Frequency in battery mode 50/60 Hz ±1%
Transfer time typically : 2 à 6 ms
Batteries
Recharge time 6-8 hours to reach 90% of capacity
Number and type of battery 1 x 12V7Ah 1 x 12V9Ah 2 x 12V7Ah 2 x 12V7Ah 2 x 12V9Ah 2 x 12V9Ah
LED Indicator
Mains mode (AC) green LED lighting
Battery-Modus green and orange LED lighting
Protection
Overvoltage / overload surge protection
Audible alarm
Battery mode sounding every 10s
Weak autonomy sounding every 1s
Overload sounding every 0.5s
Replace batteries sounding every 2s
Fault continuously sounding
Size ratio
Dimensions – mm (W x D x H) 101 x 298 x 142 149.3 x 338 x 162 158 x 380 x 198
Net weight – kg 4.25 4.9 7.8 8 11.1 11.5