VISION X
WARNING: Bolts, Nuts, and Washers are Stainless Steel.
DO NOT USE Pneumatic or Electric Tools to Tighten and
Loosen. The Hardware Will Permanently Lock Together.
MOUNTING KEY
Part (B1) Bolt [M10]
(Mounting Bracket)
Part (W1) Washer
Part (N1) Nut [M10]
(B1)
(W1)
(N1)
(Mounting Bracket)
MOUNTING INSTALLATION INSTRUCTION
1. Determine where the light/lights will be placed.
2. Place mounting bracket with light to desired location. Using
a marker or pick tool, mark the center point of the bolt hole
on the mounting surface.
3.
Set the light aside. Drill out a large enough hole to fit the
[M10] bolt Part (B1).
4. Line up the mounting bracket with the hole you just drilled,
slide the [M10] Bolt (B1) through both.
5. On the other side of mounting surface slide the [M10]
Washer Part (W1) and [M10] Nylock Nut Part (N1) onto the
[M10] Bolt (B1). Tighten Nut & Bolt to desired tightness.
MOUNTING DIAGRAM:
