VISIONXLIGHTING.COM
WIRING DIAGRAM
(P1) (+)
(+)
(+)
(-)
(-)
(-)
(H1)
Halo wire
HALO WIRE:
WIRING INSTALLATION INSTRUCTION
1.
Supplied with the ADV Light Cannon is a 3” Pigtail Part (P1).
2.
Connect the positive (red) wire and negative (black) wire into an existing
power source.
3.
To connect the Halo Wire Part (H1) tap the yellow wire to an existing power
source or on its own auxiliary switch.
MAINTENANCE
All Vision X models have been designed for maintenance free use. In the case
an LED lamp or other part replacement is needed please contact your authorized
service center.
TIP:
For complete application guide see website
