PAGE 03
OWNERS MANUAL - MONITOR SPECS & CAMERA ASSEMBLY
MONITOR
SPECS
Built-in
Recording
Yes (up to 128
GB SD Card)
CAMERA
ASSEMBLY
1 - Remove furrion plate, save and reuse screws and rubber gasket for the supplied adapter plate.
2 - Place adapter plate(Fig. 2) over gasket, and secure with furrion screws
3 - Attach supplied adapter into factory furrion plug(Fig. 10) Use the rubber grommet in the furrion
adapter plate
(Please note some factory furrion plugs may require an 1/8 inch of trim on the plug end)
4 - Secure camera and set viewing angle with the four allen wrench bolts (Fig. 5). You can always
adjust your camera viewing angle later.
5 - Screw in the antenna provided into the back of the camera. It will be at a slight angle for
accurate fitment.
Tip: Use electrical tape on the plug and adapter, You may use caulking for
water tight application.
FURRION PLATE ADAPTER MOUNTING
Allen
Wrench Bolt
Allen
Wrench
Bolt
Allen
Wrench
Bolt
Allen
Wrench
Bolt
Model
904
Aspect Ratio
Screen Size
Luminance
9 inches
16:9
500 cd/md2
Resolution
1024 x 600
Audio & Video
4 video/4
audio input
(dual channel
single image
display
Language
Mount Type
Multi-Language
U-Type
Sunshade
Removable
Voltage
12V-36V
System
PAL & NTSC
automatically
OSD Menu
Display Menu,
Brightness,
Color, Contrast
Adjustable
Set Up
Mirror for
individual image,
can set reserve
trigger delay in
settings
For permanent mounting attach the camera bracket to any flat surface with
the two truss head screws provided in the kit (inside camera mounting
hardware).
Secure camera and set viewing angle with the four allen wrench bolts (inside
camera mounting hardware). You can always adjust your camera viewing
angle later.
PERMANENT MOUNTING
Antenna
Allen
Wrench Bolt
Allen
Wrench
Bolt
Truss head
Screws
Allen
Wrench Bolt
Antenna
Furrion Plate Adapter
Fig 2.
Fig 9.
Identify your Factory furrion plate, Install wireless camera
after Visionworks furrion adapter plate is installed.
