TVC Counting Scale Technical Manual (v1.09b-v1.11)
- 12 -
and the average weight shown
is calculated from the viewer "Unit Weight".
Adding pieces on the scale,
increase the weight and count.
5.4. Automatic Part Weight Updates
After entering into parts counting, the display shows number of parts
corresponding to previous reference weight. So that continuity will be maintained
with previous parts counting this was interrupted due to power failure.
5.5. Check Weighing and Setting High / Low limits
.
5.5.1. Checking Alarm
Press and hold
key,
display will be show
To turn on checking alarm into weighing operations
To turn on checking alarm into counting operations
To turn off the checking alarm in the operations
Note: At time only one function can set to turn on
5.5.2. Check Counting / Weighing Limits
Counting Limits
By pressing
key can select counting or weighing limits.
Press
key, display will be show
PCS HI
0
Check
net
check
pcs
check
off
2.812
33.7217
30
3.316
33.7917
36
