Vision Plus 156-44DVD, User Manual

Page: 9 / 30

Helpline No UK. 0115 986 7151
Web Support: www.gradeuk.co.uk
Email: info@gradeuk.co.uk
11 11
If the TV fi nds some, but not all of the Digital channels, the TV is functioning correctly but the signal
being received is not strong enough. (The signal strength needs to be above 85% - you can see the signal
strength the TV is receiving when you change channels/ programmes) you will need to increase the
signal reception in order to receive all of the channels available. To improve signal reception whether at
home or on the move it may be necessary to upgrade or enhance your existing TV aerial. For advice and
assistance on Vision Plus Aerials and Accessories please contact:- Grade UK Limited on 0115 986 7151.
GETTING STARTED - INITIAL SET UP
Getting Started - Initial Set Up
1) Using the RF cable supplied, connect the TV
to the TV Aerial wall socket (Fig A) 2) Connect the power cable to the Electrical
outlet (Fig B)
5) You will now be welcomed with the initial
set-up screen.
If it does not appear, on the remote control,
please press [MENU] then 8-8-8-8 and the
menu will appear.
Press OK on the remote control and tuning
will start.
6) After tuning the following screen will
appear.
If you are missing channels, the reason for this is likely to be signal strength, you should
consider connecting signal booster and re-tuning the TV.
Fig A
Fig B
4) Insert the batteries supplied into the
Remote control and press the Standby
button to power on the TV
3) Switch on the television using the
power on/off switch located on the
underside of the TV.
Power on/off
Vision Plus X156-185 44E-GB-TCDUP-UK.indd Sec1:11 Vision Plus X156-185 44E-GB-TCDUP-UK.indd Sec1:11 3/9/2010 10:14:39 AM 3/9/2010 10:14:39 AM