140703-1S3
5. Installation
6. Troubleshooting
7. Dimension (mm)
8. Specification
• Non-IR Version
• Night Vision (IR) Version
Problems
Troubleshooting
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly, and
the surface of the
camera is hot.
The screen flickers
continually.
IR Beam distance
10M
-
Nothing appears on the
screen.
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
Please check that the power cord and line
connection between the camera and the monitor
are fixed properly.
Please check that you have properly connected
VIDEO cable to the camera VIDEO output jack.
Is the lens stained with dirt? Clean your lens with
soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change
the camera position.
Adjust the contrast feature of the monitor.
Please check that you have properly connected the
camera to an appropriate power source.
Please check that direction of camera turns toward
the Sun.
If you have an intermediate device, set the 75Ω / Hi-Z
properly (Please check the impedance)
Operating current
95mA (IR Off), 150mA (IR On)
85mA
Lens(Standard)
3.7mm lens
3.6mm lens
MTBF
20,000 hours
80,000 hours
Weight(Approx. g)
140
130
Image sensor
1/3" High Resolution Super Sensitive CCD
Effective Pixels
NTSC : 976(H) x 494(V), PAL : 976(H) x 582(V)
H. Resolution
700TV Lines
Synchronizing system Internal
Scanning system
NTSC : 525 Lines PAL : 625 Lines 2:1 Interlaced
Video output
1.0Vp-p Composite 75 Ohms
S/N ratio
More than 52dB (AGC Off)
Shutter Speed
NTSC : 1/60 ~ 1/100,000 sec. PAL : 1/50 ~ 1/100,000 sec.
Gamma Correction
Standard γ = 0.45
White Balance
2,300°K ~ 10,500°K Auto
Gain Control
Standard : -6dB ~ 44.8dB Auto
Smear Effect
0.005%
Power source
12VDC
Operating temp.
/Humidity
-10°C ~ 50°C (Humidity:0% RH ~ 90% RH)
Storage Temperature
-20°C ~ 60°C
IP Rating
Ø50.5 x 44.3mm (H)
Measurement(mm)
IP 66
Specifications are subject to change without prior notice for better improvement.
*
5-3. Video Monitor
5-2. Adjustment of tilting position
The tilting position can be adjusted
between 0
°
to 90
°
.
5-4.
Power
- The dome base has two
directions only
for 90
°
tilt.
- Fix the dome base after
the direction of the view
is determined.
•
•
•
- Night Vision (
IR) Version (90°)
- Non-
IR Version (90°)
Interim equipments
(DVR, Multiplexer,
Transmitter etc.)
BNC-FE (Video)
DC-Ma (Power)
·
Important:
· Night Vision (IR) Version (Ø50.5 x 44.3mm)
· Non-IR Version (Ø50.5 x 44.3mm)
Ø33
Ø50.5
44.3
Ø25
Ø50.5
44.3