Vision Hi-Tech VC58EHi, Hardware Installation Manual

Page: 4 / 16

Page 4 / 16
1. Precautions

Please read the manual carefully before the installation in order to set up the camera correctly and to
obtain the best picture quality.

Please keep the manual in good condition for your future reference and service application.

Installation and services should be only carried out by an authorized personnel according to local safety
regulations.

If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply
and have it checked by your authorized dealer before reusing.

Avoid installing the camera at extremely hot or cold places.

If you are not a certified person, never try to dismantle the camera. To avoid electric shock, never remove
the screws or covers. There are no parts inside that need maintenance by the user. All maintenance should
be carried out by qualified personnel.

Avoid installing the camera at a place of high humidity.

Avoid installing the camera at the place exposed to gas or oil.

Keep the top glass of the lens always clean in order to obtain the best picture quality all the time. Be
careful not to be stained by fingerprint.

Don't face the camera directly toward sunlight or sunlight reflecting area. CCD may go defective at this
condition.

Please give a special attention to keep the unit from dangerous drop or external shock during the process
of transportation or handling.

Never try to touch the camera in wet hand. It may cause an electric shock.

Do not expose the camera to radioactivity. It causes a serious damage on the CCD.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or implied, including but not
limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-infringement of
the third party's right. This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of this publication and/or the
corresponding product(s).
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for replacement or reasonable maintenance
of the product, for the cases, including but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special, consequential or exemplary,
arising out of or relating to the product;