VISION FUTURA VF1300 Installation And User Manual Download

Page: 12 / 16

The appliance can be operated conveniently in 2 different ways: manually or via the remote control
handset.

On/Off

Press to turn on power to the appliance. Button pushed in indicates power is on, button pushed out
indicates power is off.

Illumination On/Off

Press to turn on the appliance with the last used flame and fuel bed settings without any heat. Press again
to turn off the flame effect and fuel bed illumination..

Fuel Bed Colour

Press to cycle through the 9 colour options for the fuel bed.

Flame Colour

Press to cycle through the 9 colour options for the flames.

Press and hold for 3 seconds to disable the audible

‘

beep

’

when buttons on the appliance or remote control

handset are pressed.

Flame Colour

Fuel Bed

Colour

Illumination

On/Off

FIG. 18

OPERATION

MANUAL CONTROL

Summary of Contents for VF1300

















Search results

Summary of Contents for VF1300

Reviews:

Related manuals for VF1300

Brands by name

Popular brands

VISION FUTURA VF1300, Installation And User Manual

Search results

Summary of Contents for VF1300

Reviews:

Related manuals for VF1300

Brands by name

Popular brands