Vision Fitness X6700HRT, Owner'S Manual

Page: 28 / 48

24
X6700HR
T
ENGINEERING MODE
Engineering mode consists of 11 optional settings. Use the engineering
mode to enable certain features or displays on your Elliptical Trainer console.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP
▲
and DOWN
▼
keys for approximately three
seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP
▲
or DOWN
▼
keys to scroll through the options.
Press the ENTER key to select the appropriate mode or setting.
OPTIONAL SETTINGS
MAX TIME
USER TIME
DF AGE
DF WEIGHT
UNIT
MACHINE
AC TIME
AC DIST
DISPLAY TEST
MACHINE TEST
VERSION
S E T T I N G
SET A MAXIMUM WORKOUT TIME
SET A DEFAULT TIME FOR ALL PROGRAMS
SET A DEFAULT AGE FOR ALL PROGRAMS
SET A DEFAULT WEIGHT FOR ALL PROGRAMS
SET THE ELLIPTICAL TRAINER TO MILES OR KILOMETERS
SET UNIT TO BIKE OR ELLIPTICAL MODE
DISPLAY ACCUMULATED HOURS OF USE
DISPLAY ACCUMULATED MILES OR KM OF USE
USED BY SERVICE TECHNICIANS TO TEST LED DISPLAYS
USED BY SERVICE TECHNICIANS TO TEST MECHANICAL AND CSAFE FUNCTIONS
DISPLAY CURRENT SOFTWARE VERSION
D E S C R I P T I O N
• Use the UP
▲
and DOWN
▼
keys within each setting to change the setting.
• Press the START key to save settings.
• To EXIT engineering mode, press and hold the START key for three seconds.