21
CHAPTER 5: PART REPLACEMENT GUIDE
5.3 Heart Rate Grips Replacement
1) Remove the 2 screws holding the HR grip together (Figure A).
2) Once the 3 screws are removed, the HR grip can be split into 2 pieces (Figure B).
FIGURE A FIGURE B
3) Disconnect the HR plate wiring and remove the old HR grip (Figure C).
4) Reverse Steps 1-3 to install new HR grips. The white wire should be on the bottom side HR plate, the red wire on the upside. Make sure that the end
cap also gets installed (Figure D).
FIGURE C FIGURE D
5) Test the Bike for function as outlined in Section 5.20.
