background image

SX45 Stereo Zoom Microscope

www.visioneng.com/support

INTRODUCTION

SX45 Stereo Zoom Microscope

Vision Engineering manufacture a wide range of patented optical systems, offering fatigue-free
viewing with superb hand-eye co-ordination, for improved quality and productivity.

To achieve the most from this precision instrument, please read the enclosed assembly instructions,
usage and maintenance guidelines.

Safety Statement

Bench stand

Electrical Supply

Voltage: Electrical description: 230VAC/115VAC 50Hz/60Hz 20W

Impulse withstand (over voltage):400V

Environmental Conditions

Indoor use only

Maximum altitude: 2000M above sea level

Ambient operating temperature: between 5°C and 40°C

Storage temperature: between 0°C and 55°C centigrade for 3 months without any adverse effects

Relative humidity specification: Operating temp up to 31°C: 80%, 34°C: 70%,
37°C: 60% and 40°C: 50%

Mains voltage supply fluctuations not to exceed ± 10% of nominal voltage

If equipment is not used in a manner as specified, protection provided by the equipment may be
impaired

The product should be located such that the power supply can be unplugged in the event of an
emergency

LED Ringlight

Electrical Supply

Voltage: Electrical description: 100-240VAC 50/60HZ 280mA

Environmental Conditions

Indoor use only

Ambient operating temp: between 0°C and 40°C

Storage temperature: between 0°C and 40°C for 3 months without any adverse effects

Relative humidity specification: Operating temp up to 45°C: 80%, 28°C: 70%,
20°C: 60% and 16°C: 50%

Mains voltage supply fluctuations not to exceed ± 9 % of nominal voltage

If equipment is not used in a manner as specified, protection provided by the equipment may be
impaired

The product should be located such that the power supply can be unplugged in the event of an
emergency

Summary of Contents for SX 45

























Reviews: