Vision Engineering Swift PRO Cam User Manual Download Page 4

UNPACKING

1

2

3

Copyright

Copyright © 2017 Vision Engineering Ltd., The Freeman 
Building, Galileo Drive, Send, Woking, Surrey GU23 7ER, 

UK All Rights Reserved.

Mantis® (1532468), Lynx® (3672061) and Dynascope® 

(915579) are registered trademarks of Vision Engineering 
Ltd. The use of our trademarks is strictly controlled and 
monitored and any unauthorised use is forbidden.

Copyright in this document is owned by Vision 
Engineering Ltd. Any person is hereby authorised to 

view, copy, print and distribute this document subject to 

the following conditions:

 

ƒ

The document may be used for informational purposes 
only

 

ƒ

The document may be used for non-commercial 
purposes only

 

ƒ

Any copy of this document or portion thereof must 
include this copyright notice

Revision 1.0, published June 2017 by:

Vision Engineering Ltd. 

The Freeman Building, Galileo Drive, Send,

 

Woking, Surrey, GU23 7ER, UK

 

www.visioneng.com

Disclaimer

This document is provided “as is” without any warranty 

of  any  kind,  either  express  or  implied,  statutory  or 
otherwise; without limiting the foregoing, the warranties 
of satisfactory quality, fitness for a particular purpose or 

non-infringement are expressly excluded and under no 
circumstances will Vision Engineering Ltd. be liable for 

direct or indirect loss or damage of any kind, including 
loss of profit, revenue, goodwill or anticipated savings. 

All such warranties are hereby excluded to the fullest 
extent permitted by law.

We have compiled the texts and illustrations as accurately 

as possible. However, Vision Engineering Ltd. will not be 

responsible for the accuracy of the information contained 

in  this  document,  which  is  used  at  your  own  risk  and 

should not be relied upon. The information included in 
this manual may be changed without prior notice.

Summary of Contents for Swift PRO Cam

























Reviews: