Vision Engineering EVO Cam, User Manual, Page: 15 / 24

OPERATION
www.visioneng.com/support
9
Factory defaults
To restore EVO Cam to it’s factory settings follow the
procedure below:
`
Ensure EVO Cam is turned off.
` Press and hold the power u and Menu v buttons
until 4 beeps are heard.
`
EVO Cam will then turn on and display default
information.
` Press any button to exit the display and resume
operation.
Auto-white balance
White balance is the process of removing unrealistic
colour casts, so that objects which appear white are
rendered white on the display.
` Place a white sheet under the camera and ensure
that it covers more than half the image.
`
Press the Menu v and Overview w buttons together
and the EVO Cam will automatically perform a White
Balance operation.
White Balance data is lost when the power is
turned off. If the power is turned off, set the
White Balance again using this method.
Main menu options
` To access the Main Menu press the Menu button v .
` The Menu will appear on the top of the screen
including the menu navigational controls.
` To Exit the menu at any time simply press the
overview button
w .
The following menu options are available.
Sound: On / Off
Enable or disable the system sound.
Crosshair: On / Off
Enable or Disable the two artificially generated lines
that appear on the screen in both the horizontal and
vertical directions which cross at the centre of the
image.
M
u
w
v