Vision & Control 2-05-685 Instructions For Use Manual Download Page 4

Page: 4 / 60

TO66/16.0-160-V-B

Table of Contents

TABLE OF CONTENTS

1 Information about the Instructions of Use..................................................7

1.1 Intended Use................................................................................................ 7

1.2 Improper Use................................................................................................8

1.3 Qualified Personnel...................................................................................... 8

1.4 Warranty and Liability...................................................................................9

2 Safety............................................................................................................ 10

2.1 Presentation of Safety Instructions.............................................................10

2.2 Safe Handling of the Device...................................................................... 11

3 Scope of Delivery and Accessories.......................................................... 12

3.1 Scope of Delivery....................................................................................... 12

3.2 Accessories.................................................................................................12

4 Device Description...................................................................................... 16

4.1 Device Views.............................................................................................. 16

4.2 Operating Elements....................................................................................16

4.3 Notices on the device.................................................................................17

5 Technical Data............................................................................................. 18

5.1 General Parameters................................................................................... 18

5.2 Optical Parameters.....................................................................................20

5.2.1 Resolution...........................................................................................21

5.2.2 Depth of field......................................................................................24

5.2.3 Absolute Distortion............................................................................. 25

5.2.4 Telecentricity....................................................................................... 26

5.3 Optical characteristics (design data).......................................................... 27

5.3.1 MTF depending on the Spatial Frequency.........................................28

5.3.2 MTF depending on the Object Field...................................................37

5.3.3 Lateral chromatic aberration...............................................................46

5.3.4 Longitudinal Chromatic Aberration..................................................... 46

5.3.5 Distortion.............................................................................................47

5.3.6 Vignetting............................................................................................47

5.4 Conditions for Operation, Storage and Transport...................................... 48

5.5 Technical Drawings.....................................................................................49

6 Commissioning............................................................................................50

6.1 Unpacking...................................................................................................50

6.2 Mounting..................................................................................................... 50

6.2.1 Mounting at the clamping area...........................................................51

999.995.992.10-en-1.0

Summary of Contents for 2-05-685





























































Search results

Summary of Contents for 2-05-685

Reviews:

Related manuals for 2-05-685

Brands by name

Popular brands

Vision & Control 2-05-685, Instructions For Use Manual

Search results

Summary of Contents for 2-05-685

Reviews:

Related manuals for 2-05-685

Brands by name

Popular brands