Vision & Control 2-05-600 Instructions For Use Manual Download | Manualshive

Page: 9 / 48

background image

TOB42/11.0-185-V-WN

Information about the Instructions of Use

1.4 Warranty and Liability

The contents of this document have been checked carefully and correspond to

current legislation and best practise at the time of going to press.
However, the manufacturer shall not be liable for any damage arising from the

use of this edition of the manual, and rejects any warranty derived therefrom.
Within the bounds of the legal requirements, the manufacturer shall only

be responsible for the technical safety characteristics of the device if the

maintenance, repairs and modifications to the device are performed by himself

or by authorised skilled personnel in accordance with his instructions.

Loss of warranty

The manufacturer shall accept no liability or warranty in the event of improper

use, opening of the device or incorrect maintenance.

© Vision & Control GmbH 2020

999.995.971.10-en-2.0

9

«
...
7
8
9
10
11
...
»

Summary of Contents for 2-05-600

















































Reviews:

No comments

Related manuals for 2-05-600

Brand: Navitar Pages: 1

Brand: Starizona Pages: 6

Brand: Nauticam Pages: 10

Brand: Nauticam Pages: 16

Brand: Mitsubishi Electric Pages: 6

Brand: Fantasea Line Pages: 7

Brand: Basler Pages: 2

Voigtländer SUPER NOKTON 29mm F0.8 Aspherical

Brand: Cosina Pages: 8

FLK-TI-LENS/TELE1

Brand: Fluke Pages: 2

Brand: Fluke Pages: 3

Brand: Pentax Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands