Align White dot
with keys
White dot
Hold focus grip while
rotating accessory lens
FLK-TI-LENS/TELE1
FLK-TI-LENS/WIDE1
Optional Lenses
Instruction Sheet
How to Install and Use Optional Lenses
(Telephoto and Wide-Angle)
Optional telephoto and wide-angle lenses are available for the Ti32 and TiR32 Thermal
Imager. These lenses expand the flexibility and allow more applications for your infrared
inspection work.
To install and use an optional lens on the Imager:
With your Imager
1.
OFF
, insert the SD memory card with firmware codes for your
optional lens into the SD memory card slot on the side of your Imager.
Turn on the Imager by pressing
2.
a
.
Follow directions displayed on the LCD to install the proper files onto the Imager’s
3.
internal memory.
PN 3474356 August 2009
© 2009 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies. Specifications are subject to change without notice.
exj05.eps
Figure 1. Attachment and Removal of Optional Lenses
After file installation, remove the SD memory card with the firmware files and reinsert
4.
the standard SD memory card used for storing images.
Attach the optional lens onto the Imager by aligning the dot on the lens with the dot on
5.
the Imager, see Figure 1.
Gently push optional lens into position and rotate clockwise until lens locks into proper
6.
position.
Note
It is important to select the proper lens option within your Imager’s Settings/Lens menu.
To select or change the lens in use on the Imager:
Press
1.
a
until the F3 softkey label reads
Settings
.
Press the softkey labeled
2.
Settings
.
Within the Settings Menu, press
3.
a
, labeled
Menu
, until the F3 softkey reads
Lens
.
Press the softkey labeled
4.
Lens
.
Press the softkey labeled
5.
Up
(
c
) or
Down
(
d
) to select the lens.
Press the softkey labeled
6.
Done
when finished.
Continue adjusting other items in the Settings Menu, or quickly squeeze and release
7.
the trigger twice to return to live view.
