Vision & Control 2-05-600 Instructions For Use Manual Download

Page: 6 / 48

TOB42/11.0-185-V-WN

Table of Contents

Table of Figures

1: Device view.................................................................................................16

2: Type plate................................................................................................... 17

3: Illustrative sketch of optical characteristics................................................ 24

4: MTF - spatial frequency dependent (470 nm, F10, WD 182.9 mm)........... 25

5: MTF - spatial frequency dependent (470 nm, F16, WD 183.4 mm)........... 25

6: MTF - spatial frequency dependent (525 nm, F10, WD 181.8 mm)........... 26

7: MTF - spatial frequency dependent (525 nm, F16, WD 182.4 mm)........... 26

8: MTF - spatial frequency dependent (635 nm, F10, WD 181.7 mm)........... 27

9: MTF - spatial frequency dependent (635 nm, F16, WD 182.2 mm)........... 27

10: MTF - spatial frequency dependent (850 nm, F10, WD 183.1 mm)........... 28

11: MTF - spatial frequency dependent (850 nm, F16, WD 183.6 mm)........... 28

12: MTF - spatial frequency dependent (white, F10, WD 182.6 mm)...............29

13: MTF - spatial frequency dependent (white, F16, WD 182.6 mm)...............29

14: MTF - image field dependent (470 nm, F10, WD 182.9 mm).....................30

15: MTF - image field dependent (470 nm, F16, WD 183.4 mm).....................30

16: MTF - image field dependent (525 nm, F10, WD 181.8 mm).....................31

17: MTF - image field dependent (525 nm, F16, WD 182.4 mm).....................31

18: MTF - image field dependent (635 nm, F10, WD 181.7 mm).....................32

19: MTF - image field dependent (635 nm, F16, WD 182.2 mm).....................32

20: MTF - image field dependent (850 nm, F10, WD 183.1 mm).....................33

21: MTF - image field dependent (850 nm, F16, WD 183.6 mm).....................33

22: MTF - image field dependent (white, F10, WD 182.6 mm)........................ 34

23: MTF - image field dependent (white, F16, WD 182.6 mm)........................ 34

24: Lateral chromatic aberration - wavelength dependent............................... 35

25: Longitudinal chromatic aberration - wavelength dependent.......................35

26: Distortion - wavelength dependent.............................................................36

27: Vignetting.................................................................................................... 36

28: Assembly regions....................................................................................... 39

29: Illustrative sketch - working distance..........................................................41

30: Adjusting the aperture................................................................................ 42

999.995.971.10-en-2.0

Summary of Contents for 2-05-600

















































Search results

Summary of Contents for 2-05-600

Reviews:

Related manuals for 2-05-600

Brands by name

Popular brands

Vision & Control 2-05-600, Instructions For Use Manual

Search results

Summary of Contents for 2-05-600

Reviews:

Related manuals for 2-05-600

Brands by name

Popular brands