TZB10-B450-HP-24V
Commissioning
Mount the Deflection Mirror
1.)
2.) 3.)
a
a
a
a
b
1. Loosen the M3 threaded pins (a) of the deflection mirror.
2. Attach the deflection mirror on the lighting. Rotate the mirror (b) to the
desired position.
3. Tighten the M3 thread pins alternately hand-tight in small steps.
6.4 Attach the Security Label
Due to the individual assembly and installation options, the device is supplied
with the safety label "optical radiation".
After completing all assembly work, attach the safety label to the device so that
it is clearly visible.
Attach the safety label so that it is legible without exposing yourself to the
optical radiation of the device.
If a sufficiently large and clearly visible area is not available on the device,
attach the safety label close to the product.
© Vision & Control GmbH 2021
999.995.425.10-en-1.6
23
