background image

LDLF60x600-G525/UDC

EU Declaration of Conformity

10 EU DECLARATION OF CONFORMITY

Vision & Control GmbH

Mittelbergstraße 16

D-98527 Suhl, Germany

Representative: Dr. Jürgen Geffe, Managing director

We, Vision & Control GmbH Suhl, declare that the product described below
– Designation: LDLF60x600-G525/UDC

– Order no.: 1-13-958
has been manufactured in accordance with the following standards and

normative documents:

2014/30/EU - Electromagnetic compatibility (EMC directive)

DIN EN 61000-6-2:2006-3 - Electromagnetic compatibility (EMC) - Immunity

for industrial environments

DIN EN 61000-6-4:2011-09 - Electromagnetic compatibility (EMC) -

Emission standard for industrial environments

DIN EN 61000-4-2:2009-12 Electromagnetic compatibility (EMC) - Testing

and measurement techniques - Electrostatic discharge immunity test

DIN EN 62471:2009-03 / EN 62471:2008 - Photobiological safety of lamps

and lamp systems

The product complies with the requirements of Directive 2011/65/EU (RoHS 2)

of June 8, 2011 along with Directive 2015/863/EU (RoHS 3) of March 31, 2015

of the European Parliament and of the Council on the restriction of the use of

certain hazardous substances in electrical and electronic equipment.
Suhl, 2018-11-30
Dr. Jürgen Geffe
Managing director

34

999.995.516.10-en-2.2

© Vision & Control GmbH 2019

Summary of Contents for 1-13-958





































Reviews: