Viscount Prestige 50, Quick Manual

Page: 10 / 28

8
Viscount - Quick Guide
Prestige 50
5. [MEM+] and [MEM-] buttons:
these buttons can be used to select the general memories in ascending
and descending order.
6. [M.SOLO] button:
these buttons control the status of the MIDI Solo function for the Swell (6A) and
Great (6B). By activating this function, on the instrument connected to the [MIDI OUT] port only the
highest note of those pressed down will sound (monophony with priority given to the highest note).
NOTE
The monophonic notes generated by the MIDI Solo are only sent on MIDI channel B.
For a detailed description of the MIDI channels controlled by the organ see the “Advanced
Manual”.
7. [ENC] button: pressing this button activates the Enclosed function used to control the organ’s general
volume by means of the [SWELL] pedal.
8. [T] button: “Tutti” button, which turns on a preset series of voices and couplers.
The voice composition of the ‘Tutti’ function is programmable. To save a new set up, switch on the
voices and couplers of your choice, press [S] and, keeping it pressed down, then press button [T] or
the [TUTTI] foot piston.
9. [SW/G] button:
this button enables the coupling of the Swell with the Great.
10. [O.SOLO] button:
this button controls the status of the Organ Solo function. By activating this function
plus the coupling SW/G the voices of the Swell can be played on the Great in monophony with
priority given to the highest note. On the Swell the voices continue to sound in polyphony
.
11. [A.P.] button: this button enables the Automatic Pedal, used to play the voices of the pedal board
using the first 32 notes of the Great. In this case, the organ pedal board is deactivated and the voices
become monophonic, with priority given to the lowest note.
12. Floppy disk drive: use only 720 Kb or 1.44 Mb 3.5" floppy disks.
13. [C] button:
“Cancel” button, which switches off any voices, couplers and buttons on the manual
divisionals which may be on and turns the HR buttons on.